This housing has a maximum depth of 20 metres. For balancing the rig it uses standard dive weights cable tied onto Burns ballast bars, for trim it can also be de-weighted and used on the surface floating. It uses the Red 5 inch monitor which can be positioned on top or at the rear for a streamlined position. The kit comes with V lock batteries and two chargers but this can easily be changed to gold mount system. The continual running time is around 3-4 hrs with the V locks. The housing has an internal fan to prevent heat build-up in specific places however it is not essential, there is also a spare fan in the kit.
Dome and flat ports come with the kit; the flat ports are Wetports and can be used on the surface as well as adjustable sunshade material. Focus and iris control are operated by your thumb which means your hands do not leave the handles and you maintain your balance, also great for iris pulls when you tilt up. The housing can also be rigged with a Preston motor for focus.
The housing has an external video cable RG 6 HD and can be used for video split or external recording. All functions are through the Redmote mounted and accessed through the rear port.
The housing is vacuum tested at the surface meaning that the air is sucked out sealing the housing and then measured with a vacuum gauge this process guarantees the water tight integrity before going into the water.
|Focus||Focus and iris control are operated by your thumb|
|Cable||RG6 HD 50m, 25m Standard length|
|Monitor||External Red 5 inch LCD|
|Lenses||Most primes and short zooms|
|Ports||Dome and flat|
|Base plate||Bottom for rigging or tripod|
|Cooling||Housing has internal fan to prevent heat build-up in specific places – not essential|